1.Design speed: 200 m/minutes
2.Effective width: 2000mm
3.Cutter cutting accuracy: uniform length: 500-9999mm + 1mm
4.Computers can store multiple sets of orders, the man-machine interface, color touch screen display
5. Adopt Shanghai Futian 11KW AC servo motor and servo driver 15KW Kobe of Germany
6.Gear by precision forging material high-frequency quenching gear grinding, no backlash transmission, using advanced keyless connection, high transmission precision, long service life;
7.Use high speed steel spiral blade, saw blade type, reduce board resistance, low noise;
8.Before and after the 8 feeding roller adopts the sun wheel pressure paper, smooth delivery, uniform pressure, not easy to crush the cardboard or jam;
9.Using the independent two oil pump and the filter with 9 groups of purple copper pipe distribution in each gear oil supply, lubrication and cooling;
10.Knife roller: high quality precision forging steel, dynamic balance processing, good stability;
Main technical parameters:
1.Effective width of: 2000mm.
2.Operation direction: left or right operation(according to customer's factory to determine).
3.Maximum economic speed: 200m/min
4.Machine configuration: computer spiral cutter
5.Minimum cutting length: 500mm
6.Maximum cutting length: 9999mm
7.Cutting accuracy: ± 1mm(on same speed), ± 2mm(on variable speed)
Roller diameter parameter:
1.On the 1 cutting knife shaft diameter: Φ200mm handling of dynamic balancing
2 after the transfer roller diameter: Φ130mm handling of dynamic balancing
3 before and after the roller diameter: 70 mm
Note: The surface of all the roller are hard chromium plating after grinding. (Except for the upper and lower cutter shaft)
Power motor and electrical parameters:
1.Main drive motor power: 18.5kw; AC servo motor
2.Before and after transmission of paper motor power: 3.0kw; frequency adjustable speed motor
3.Oil pump motor power: 0.37kw
